Исследования физико-механических свойств волокон шерсти путем проведения полнофакторного эксперимента
DOI:
https://doi.org/10.47813/2782-2818-2024-4-2-0301-0313Ключевые слова:
полнофакторный эксперимент, входной параметр, выходной параметр, относительное удлинение при разрыве, прочность на разрыв, коэффициент регрессии, качество шерстяного волокна, критерий Кохрена, критерий СтьюдентаАннотация
В данной научной статье проведен полнофакторный эксперимент по оцениванию качественных показателей шерстяных волокон, хранившихся, сортированных и промываемых в разные сроки и при различных условиях. Представлены уравнения регрессии на основе входных и выходных факторов при обработке результатов эксперимента по показателям качества шерстяного волокна. Входными факторами приняты: скорость разрыхлительного вала, расстояние передачи волокна и скорость регулятора волокна. В качестве выходных факторов принимались: разрывная прочность шерстяного волокна, относительное удлинение волокна при разрыве, масса отделяемого волокна и время падения волокна.
Библиографические ссылки
Nazarova M.A., Kayumov J.A. Increasing the scale of the use of coarse wool based on the analysis of wool fibers. Andijan Institute of Mechanical Engineering” modern problems in the innovative development of Science, Education and production " international-scientific practical conference (2020).
Wool is the word wool. Week 2017 in London once again served up a vibrant, modern, sustainable fusion of wool to support the industry. Wool review: International wool textile organization. 2017; 2: 25-27.
Kuliev T. M., Sobirov D. Kh., Atanafasov M. R. Theoretical analysis of processing of wool fibers under the influence of moving rollers. Экономика и соsиум. 2024; 3(118).
Abrorov A. et al. Mathematical model of hardening the disk-shaped saw teeth with laser beams. Journal of Physics: Conference Series. 2022; 2373: 022021. https://doi.org/10.1088/1742-6596/2373/2/022021
Аброров А. C., Кувончева М. Р., Хасанова Н. Н., Мухаммадов М.М., Саидов Х. А. Производственные испытания дисковых пил после ионноплазменного азотирования и лазерной закалки волокноотделительной машины марки 5ДП-130. Современные инновации, системы и технологии - Modern Innovations, Systems and Technologies. 2022; 2(4): 0331–0338. https://doi.org/10.47813/2782-2818-2022-2-4-0331-0338
Sobirov D. X., Quliyev T. M., Qulmetov M., Atanafasov M. R. Valiklar ta’sirida hosil bo‘ladigan tashqi kuchlarni jun tolalariga ta’sirning tahlili. Экономика и соsиум. 2024; 3(118).
Abrorov A. et al. Computational analysis of multivariant physical and mechanical experiments on laser hardening of gin disc saws. Journal of Physics: Conference Series. 2023; 2573: 012038. https://doi.org/10.1088/1742-6596/2573/1/012038
Kuliev T. M., Sobirov D.Kh., Sapaev R.A., Rakhimova G.P., Atanafasov M.R. Theory of motion analysis of wool fibers under the action of pinching rollers. Current problems of modern science, education and education (electronic scientific collection). 2024; 2: 62-67.
REFERENCES
Nazarova M.A., Kayumov J.A. Increasing the scale of the use of coarse wool based on the analysis of wool fibers. Andijan Institute of Mechanical Engineering” modern problems in the innovative development of Science, Education and production " international-scientific practical conference (2020).
Wool is the word wool. Week 2017 in London once again served up a vibrant, modern, sustainable fusion of wool to support the industry. Wool review: International wool textile organization. 2017; 2: 25-27.
Kuliev T. M., Sobirov D. Kh., Atanafasov M. R. Theoretical analysis of processing of wool fibers under the influence of moving rollers. Ekonomika i sosium. 2024; 3(118).
Abrorov A. et al. Mathematical model of hardening the disk-shaped saw teeth with laser beams. Journal of Physics: Conference Series. 2022; 2373: 022021. https://doi.org/10.1088/1742-6596/2373/2/022021 DOI: https://doi.org/10.1088/1742-6596/2373/2/022021
Abrorov A. C., Kuvoncheva M. R., Hasanova N. N., Muhammadov M.M., Saidov H. A. Proizvodstvennye ispytaniya diskovyh pil posle ionnoplazmennogo azotirovaniya i lazernoj zakalki voloknootdelitel'noj mashiny marki 5DP-130. Sovremennye innovacii, sistemy i tekhnologii - Modern Innovations, Systems and Technologies. 2022; 2(4): 0331–0338 https://doi.org/10.47813/2782-2818-2022-2-4-0331-0338 (in Russian). DOI: https://doi.org/10.47813/2782-2818-2022-2-4-0331-0338
Sobirov D. X., Quliyev T. M., Qulmetov M., Atanafasov M. R. Valiklar ta’sirida hosil bo‘ladigan tashqi kuchlarni jun tolalariga ta’sirning tahlili. Ekonomika i sosium. 2024; 3(118).
Abrorov A. et al. Computational analysis of multivariant physical and mechanical experiments on laser hardening of gin disc saws. Journal of Physics: Conference Series. 2023; 2573: 012038. https://doi.org/10.1088/1742-6596/2573/1/012038 DOI: https://doi.org/10.1088/1742-6596/2573/1/012038
Kuliev T. M., Sobirov D.Kh., Sapaev R.A., Rakhimova G.P., Atanafasov M.R. Theory of motion analysis of wool fibers under the action of pinching rollers. Current problems of modern science, education and education (electronic scientific collection). 2024; 2: 62-67.
Загрузки
Опубликован
Как цитировать
Выпуск
Раздел
Лицензия
Copyright (c) 2024 Тахир Кулиев, Даниёр Собиров
Это произведение доступно по лицензии Creative Commons «Attribution» («Атрибуция») 4.0 Всемирная.
Журнал MIST - «Modern Innovations, Systems and Technologies» / «Современные инновации, системы и технологии» публикует материалы на условиях лицензии CreativeCommons Attribution 4.0 International (CC BY 4.0), размещенной на официальном сайте некоммерческой корпорации Creative Commons:
This work is licensed under a Creative Commons Attribution 4.0 International License.
Это означает, что пользователи могут копировать и распространять материалы на любом носителе и в любом формате, адаптировать и преобразовывать тексты, использовать контент для любых целей, в том числе коммерческих. При этом должны соблюдаться условия использования — указание автора оригинального произведения и источника: следует указывать выходные данные статей, предоставлять ссылку на источник, а также указывать, какие изменения были внесены.