Investigation of working bodies of cotton cleaning machine

Anvar  Dzuraev; Sardor  Sayitkulov; Bekzod  Bozorov; Sitora  Fatullaeva

doi:10.47813/2782-2818-2021-1-4-47-54

Investigation of working bodies of cotton cleaning machine

Authors

Anvar Dzuraev Tashkent Institute of Textile and Light Industry, Tashkent, Uzbekistan
Sardor Sayitkulov Bukhara Engineering Technological Institute, Bukhara, Uzbekistan
Bekzod Bozorov Bukhara Engineering Technological Institute, Bukhara, Uzbekistan
Sitora Fatullaeva Bukhara Engineering Technological Institute, Bukhara, Uzbekistan

DOI:

https://doi.org/10.47813/2782-2818-2021-1-4-47-54

Keywords:

raw cotton, cotton cleaner, trash, pegs, cylinder

Abstract

The article included information on how to improve the working bodies of the machine for cleaning raw cotton, including large waste mixtures waste disposal sites. Based on the analysis of the design of cotton ginning machines and working bodies, a new effective design scheme of cotton gin from large contaminants was developed. The recommended multi-faceted columns are characterized by good cleaning of cotton waste and maintenance of fiber quality.

References

Sayitqulov, S.O. Development of a Nev Design for Drying Cotton Seeds with Purpose of efficient Use of Heat / S.O. Sayitqulov, S.Kh. Fayziev, F.B. Mardonova, Kh.K. Rakhmonov // International Journal of Advanced Research in Science, engineerring and Technology. – 2020. – № 7(4). – P. 13440-13445.

Fayziev, S.Kh. Creation of a New Design of a System for Feeding raw Cotton to a Cylinder / S.Kh. Fayziev, Kh.K. Rakhimov // International Journal of Recent Technology and Engineering. – 2019. – № 8(4). – P. 12753-12759.

Abrorov, Akbar. Vacuum Installation of Technology of Deep Ion-Plasmic Nitriding Disc Saw Of Fiber Separating Machines / Akbar Abrorov, Shukhrat Salimov, Sohibov Ibodullo, Matluba Quvoncheva // International Journal of Advanced Research in Science, engineerring and Technology. – 2020. – № 7(1). – P. 12406-12409.

Rakhmonov, Kh. Relative speed and temperature effect investigation of the of the drying agent on the moisture content of cotton / Kh. Rakhmonov, S. Fayziev, Kh. Rakhimov, D. Kazakova // E3S Web of Conferences. – 2021. – 264 04008.

Juraev, Anvar. Analysis of the interaction of Fibrous Material with a Multifaceted Grid of the cleaner / Anvar Juraev and Ozod Rajabov // International Journal of Recent Technology and Engineering. – 2019. – № 8(1). – P. 2661-2666.

Fayziyev, S.Kh. Study of effect of speed and temperature of the drying agent in the feeder-loosened of new design on the quality of fiber / S.Kh. Fayziyev, Kh.K. Rakhmonov // International Journal of Advanced Research in Science, engineerring and Technology. – 2020. – № 8(10). – P. 7008-7013.

Dzuraev, A. Research on improving the working bodies of the machine for cleaning cotton from waste / A. Dzuraev, S.O. Sayitqulov // International Journal of Research and Development. – 2021. – № 6(3) 36713.

Downloads

Published

2021-12-30

How to Cite

Dzuraev, A. ., Sayitkulov, S. ., Bozorov, B. ., & Fatullaeva, S. . (2021). Investigation of working bodies of cotton cleaning machine. Modern Innovations, Systems and Technologies, 1(4), 47–54. https://doi.org/10.47813/2782-2818-2021-1-4-47-54

Conference Proceedings Volume

Vol. 1 No. 4 (2021)

Section

Applied questions and problems of application of systems and technologies.

License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The journal MIST - "Modern Innovations, Systems and Technologies" publishes materials under the terms of the Creative Commons Attribution 4.0 International (CC BY 4.0) license, hosted on the official website of the non-profit corporation Creative Commons:
This work is licensed under a Creative Commons Attribution 4.0 International License.

This means that users can copy and distribute materials in any medium and in any format, adapt and transform texts, use content for any purpose, including commercial ones. At the same time, the terms of use must be observed - an indication of the author of the original work and the source: you should indicate the output of the articles, provide a link to the source, and also indicate what changes have been made